At Critical Power Supplies we have set our services range to provide a full turn-key power solutions package, whilst allowing clients and partners to select only those services that they require. The two most important services to ensure a ‘clean install’ are electrical installation and commissioning, both of which may require certificates to be issued before a system can be made ‘live’.
Electrical Installation and Commissioning Services
Our Critical Power and Energy experts can organise a complete IEE certified electrical installation including:
- Assessment of the building incomer and existing single and three phase supplies, distribution and cabling.
- The provision of full AC power distribution, electrical and site monitoring cabling, HV/LV panels, switchgear, distribution panels and power distribution units.
All works (including UPS, generator and associated electrical switchgear installation) are carried out subject to quotation by one of our approved partners and installations are tested to the highest standards before certification and handover.
UPS and generator commissioning can be more than a simple switch on process. For complex systems it can involve an inspection of connections, peripherals, inside-the-box components, firmware matching, configuration and final setup and test prior to switch-on. Commissioning is therefore a ‘boot-up’ process that relies on every assembly being ready to perform its role within the UPS system. Only then can a system be started and the training and handover begin to the site representative.
UPS up to 3kVA with plug and socket connections are user-commissionable. Hardwired systems and larger systems will require connection to the electrical supply and commissioning by suitable qualified and certified personnel.
Some UPS and generator manufacturers may void their warranty terms if one of their systems is not commissioned by a certified engineer. This is especially clear where the commissioning engineer has to have access to a manufacturer’s dongle and communications software. Other UPS or generator systems may operate an ‘open protocol’ with widely accessible passwords but even here they may reserve the right to cancel their warranty obligations if the UPS system has not been commissioned correctly.
Load Bank Testing
As part of our commissioning service load bank testing can be supplied. The use of load banks provides a thorough testing of the UPS battery to support its load.
Where a UPS or generator system is decommissioned, Critical Power Supplies can organise its removal and environmental disposal as part of our removal and recycling service.
At Critical Power Supplies we only use trained and certified engineers as part of our ongoing commitment to provide the best possible power solution for your installation. Commissioning, training and handover normally take place within the same site visit, and can be made either within normal working hours or at flexible times by prior arrangement to suit the project timetable.
Critical Uninterruptible Power Supplies and Power Solutions
Note: request a quotation for a confirmation of pricing specific to your solution.
|Installation Services||Commissioning PMV Call Out||Commissioning PMV Call Out||Commissioning PMV Call Out||Battery Build Cabinet per kg||Battery Build Cabinet per kg||Battery Build Cabinet per kg||Battery Build Rack per kg||Battery Build Rack per kg||Battery Build Rack per kg||DC Cable M|
|UPS Rating||NH||OH||WH||NH||OH||WH||NH||OH||WH||per meter|