24 Hour: 0800 978 8988 Int: +44 (0)1844 340122
x

Riello Multi Switch ATS - MSW-ATS

Part Number: MSW-ATS

Product (ex VAT):
£318.82
Product (inc VAT):
£382.58
32 IN STOCK:

Operating principle

Multi Switch ATS 16 amp Dual inputs and 3 way distributed outputs 2 × 4 x10amp IEC 1 × 15A IEC (SNMP version)
The Multi-Switch provides electrical distribution and remote management for up to eight network users, powered from either one or two direct mains supplies or UPS or a combination of both.
Multi-Switch can connect each user (up to eight, each with a maximum power demands not greater than 3A), to either of the two power sources (A and B). Load demand is shown on the LCD

Protection against load faults

If one of the loads fails (e.g. short circuit), Multi-Switch ATS disconnects the group of sockets where the load is connected, thus preventing other loads from being switched off (i.e. in the event of poor selectivity of the protection devices).

Protection against power supply faults

If one of the two power sources falls outside tolerance levels, Multi-Switch ATS will transfer the consumers to the second power source (switching is instantaneous if the two sources are in phase).

Features

  • Full protection for consumers against mains and load failures.
  • Versatile to use: Multi Switch ATS can be powered with 2 different power supplies (2 UPS even of different sizes/types).
  • 19” cabinet installation.
  • Display panel.
  • Can be connected to PowerNetGuard supervision software.
  • No signal connection between the Multi Switch ATS and the power sources or consumers is necessary.
  • Compatible with PowerShield³ software.
  • Slot for communications boards.
Downloads
Product Datasheet Multi_Switch_ATS.pdf
UPS Software & Monitoring Datasheet Software.pdf

Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24x7 on our sales number.

1: Plug and Play (400-3kVA) - Extended Warranty Contracts from 1 to 5 years from £9.99 per month ex VAT

For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

Warranty Plus Extends your warranty up to 3 years, next working day replacement
Critical Power Supplies - Riello Multi Switch ATS image 1
Warranty Plus Extends your warranty up to 5 years, next working day replacement
Critical Power Supplies - Riello Multi Switch ATS image 2
Intervention, Provides one preventative maintenance visit, planned visit  
Critical Power Supplies - Riello Multi Switch ATS image 3
Battery Plus, Provides replacement batteries to site, next working day replacement
Critical Power Supplies - Riello Multi Switch ATS image 4
Warranty One Extends your warranty up to 1 year, next working day replacement  
Critical Power Supplies - Riello Multi Switch ATS image 5


2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

Services Included

Silver Level

Gold Level

Platinum Level

 

Technical Hotline 24/7
Yes
Yes
Yes
Critical Power Supplies - Riello Multi Switch ATS image 6
Preventative Maintenance
Yes
Yes
Yes
Critical Power Supplies - Riello Multi Switch ATS image 7
Remote Monitoring 24/7
Yes
Yes
Yes
Critical Power Supplies - Riello Multi Switch ATS image 8
Firmware Upgrades
Yes
Yes
Yes
Critical Power Supplies - Riello Multi Switch ATS image 9
Emergency Response
Yes
Yes
Yes
Critical Power Supplies - Riello Multi Switch ATS image 10
Labour
Yes
Yes
Yes
Critical Power Supplies - Riello Multi Switch ATS image 11
Parts
Yes
Yes
Yes
Critical Power Supplies - Riello Multi Switch ATS image 12
Monthly Event/Status Report
option
option
option
Critical Power Supplies - Riello Multi Switch ATS image 13
Onsite Crash Kit
option
option
option
Critical Power Supplies - Riello Multi Switch ATS image 14
Response Time
12 working hours
8 working hours
4 clock hours
Critical Power Supplies - Riello Multi Switch ATS image 15

 

3: 24x7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

Engineer Installation and configuration during normal hours
Critical Power Supplies - Riello Multi Switch ATS image 16
24x7 flexible status and remote monitoring.      
Critical Power Supplies - Riello Multi Switch ATS image 17
Encrypted communication, allowing safe offsite monitoring    
Critical Power Supplies - Riello Multi Switch ATS image 18
Alarms and events emailed and SMS texted automatically    
Critical Power Supplies - Riello Multi Switch ATS image 19
Firewall Friendly
Critical Power Supplies - Riello Multi Switch ATS image 20
Cloud based status overview and multiple sites status on one screen
Critical Power Supplies - Riello Multi Switch ATS image 21
Allows First Fix Response to Site
Critical Power Supplies - Riello Multi Switch ATS image 22


>

4. IR Thermal Imaging Surveys - Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

.

Let us know what you think of this product

If you have purchased this from us in the past then please take some time to review the product, along with the quality of service you received from us!

How can we help?