APC Back-UPS 1.4kVA Line Interactive 230V (UPS) - BX1400UI
This product has been Discontinued
Why not take a look at?
APC Back-UPS 1600VA, 230V, AVR, IEC SocketsView Product
Back-UPS Features & Benefits
Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
LED status displayQuickly understand unit and power status with visual indicators.
Audible alarmsProvides notification of changing utility power and UPS power conditions
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.
Surge only outletsProtect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
- Technical Data
Power Output frequency regulation 50/60 Hz Input power factor 0.5 Output power 700 W Input operation voltage (min) 150 V Input operation voltage (max) 280 V Surge energy rating 273 J Maximum current 6 A Efficiency 97.4% Output power capacity 1400 VA Ports & interfaces Cable length 1.22 m USB port Yes AC outlets quantity 6 AC outlet(s) AC outlet types C13 coupler Power plug C14 coupler Number of output IEC jumpers 2 Performance Hold time (min) 8 ms Hold time (max) 10 ms Audible alarm modes Overload alarm UPS topology Line-Interactive Waveform Sine Auto-restart Yes Automatic Voltage Regulation (AVR) Yes LED indicators Battery replacement Surge protection Yes Surge protection features Fax,Modem Noise level 45 dB Audible alarm(s) Yes Features Hold time (min) 8 ms Hold time (max) 10 ms Audible alarm modes Overload alarm UPS topology Line-Interactive Waveform Sine Output frequency regulation 50/60 Hz Auto-restart Yes Automatic Voltage Regulation (AVR) Yes Input power factor 0.5 Output power 700 W Input operation voltage (min) 150 V Input operation voltage (max) 280 V Surge energy rating 273 J Maximum current 6 A Efficiency 97.4% Surge protection Yes Surge protection features Fax,Modem Noise level 45 dB Audible alarm(s) Yes Output power capacity 1400 VA Input frequency 50/60 Hz Battery Battery life (max) 5 year(s) Battery capacity 165 VAh Number of batteries supported 2 Battery voltage 12 V Battery capacity 7.2 Ah Battery technology Sealed Lead Acid (VRLA) Battery recharge time 8 h Typical backup time at half load 11.2 min Typical backup time at full load 2.4 min Automatic battery test Yes Design Form factor Tower LED indicators Battery replacement Product colour Black Display LED Certification A-tick, C-tick, CE, IEC 62040-1-1, Telepermit Cable length 1.22 m Operational conditions Operating temperature (T-T) 0 – 40 C Storage temperature (T-T) -15 – 40 C Operating relative humidity (H-H) 0 – 95% Storage relative humidity (H-H) 0 – 95% Operating altitude 0 – 3000 m Non-operating altitude 0 – 9000 m Technical details Type of input protection required 3-pole circuit breaker Weight & dimensions Weight 12 kg Width 130 mm Height 215 mm Depth 336 mm Package width 245 mm Package depth 440 mm Package height 295 mm Package weight 12.9 kg Packaging data Manual Yes Package width 245 mm Package depth 440 mm Package height 295 mm Bundled software PowerChute Personal Edition Package weight 12.9 kg Certificates Certification A-tick, C-tick, CE, IEC 62040-1-1, Telepermit Other features Type of input protection required 3-pole circuit breaker Nominal output voltage 230 V Nominal input voltage 230 V Packaging content Manual Yes Bundled software PowerChute Personal Edition
- Onsite Maintenance
Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.
1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT
For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.
Warranty Plus Extends your warranty up to 3 years, next working day replacement Warranty Plus Extends your warranty up to 5 years, next working day replacement Intervention, Provides one preventative maintenance visit, planned visit Battery Plus, Provides replacement batteries to site, next working day replacement Warranty One Extends your warranty up to 1 year, next working day replacement
2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT
No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.
Technical Hotline 24/7 Yes Yes Yes Preventative Maintenance Yes Yes Yes Remote Monitoring 24/7 Yes Yes Yes Firmware Upgrades Yes Yes Yes Emergency Response Yes Yes Yes Labour Yes Yes Yes Parts Yes Yes Yes Monthly Event/Status Report option option option Onsite Crash Kit option option option Response Time 12 working hours 8 working hours 4 clock hours
3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT
Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.
Engineer Installation and configuration during normal hours 24×7 flexible status and remote monitoring. Encrypted communication, allowing safe offsite monitoring Alarms and events emailed and SMS texted automatically Firewall Friendly Cloud based status overview and multiple sites status on one screen Allows First Fix Response to Site
4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.
Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.
Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.
- Reviews (0)
Customers also bought…
Salicru UBT 12Ahr Battery Replacement
UBT 12/12£32.59 Ex. VAT £39.11 Inc. VAT Add to basket
Riello Sentinel Dual B1 40Ahr EBM (for SDU/STW 6kVA ER)
BB 1320 180V B1£2,456.91 Ex. VAT £2,948.29 Inc. VAT Add to basket
APC 1Yr EAA Prev Srvc Upgrd to FW or Exstng Srvc Plan – (1) 1or3P UPS 10 – 40kVA, Batt Frm, PDU or Acc.
WUPGEAA-UG-01£93.01 Ex. VAT £111.61 Inc. VAT Add to basket
Eaton 5PX 3000i RT2U Netpack
5PX3000IRTNThis product has been Discontinued Add to basket
Shown below is a small selection of some of our customers we have helped through understanding clients challenges and implementing our unique approach to helping clients built around: listening to our clients, understanding the challenges they face and providing a range of options which compliments their requirements. Our aim is not to sell products but provide solutions with the help of our in house Power Consultants and Electricians.