
APC Back-UPS 325, 230V, IEC 320, without auto shutdown software - BK325I
- In Stock, 28 Available to order.
- Order within for delivery on .
£68.12 Ex. VAT £81.74 Inc. VAT
All major debit and credit cards accepted.
- Description
Back-UPS Features & Benefits
Safety
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Marketing features
Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Protection
Surge only outlets Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes .
Availability
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Manageability
LED status display Quickly understand unit and power status with visual indicators.
Audible alarms Provides notification of changing utility power and UPS power conditions
- Technical Data
Output
Max Configurable Power (Watts) 210 Watts
/ 350VAOutput Frequency (sync to mains) 47 – 63 Hz Sync to mains, 50/60 Hz +/- 1 Hz Unsynchronised Topology Standby Waveform type Stepped approximation to a sinewave Transfer Time 6 ms typical : 10 ms maximum Input
Input frequency 50/60 Hz +/- 3 Hz Auto-sensing Input voltage range for main operations 180 – 266V Number of Power Cords 1 Batteries & Runtime
Battery type Lead-acid battery Typical recharge time 6hour(s) Nominal Battery Voltage 12 V Replacement Battery RBC2 Expected Battery Life (years) 4 – 6 RBC Quantity 1 Battery Charge Power (Watts) 14 Watts Runtime View Runtime Graph Efficiency View Efficiency Graph Communications & Management
Control panel LED status display with on line : on battery : replace battery and overload indicators Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Surge Protection and Filtering
Surge energy rating 310Joules Filtering Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 Physical
Maximum Height 165MM, 16.5CM Maximum Width 91MM, 9.1CM Maximum Depth 284MM, 28.4CM Net Weight 5.73KG Shipping weight 6.73KG Shipping Height 178MM, 17.8CM Shipping Width 241MM, 24.1CM Shipping Depth 368MM, 36.8CM Color Beige Master Carton Units 2.0 Units per Pallet 48.0 Environmental
Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 3048meters Storage Temperature -15 – 45 °C Storage Relative Humidity 0 – 95 % Storage Elevation 0 – 15240meters Online thermal dissipation 19.0BTU/hr Conformance
Approvals C-Tick, CE, EN 50091-1, EN 50091-2, GOST, VDE Standard warranty 2 years repair or replace Sustainable Offer Status
RoHS Compliant - Onsite Maintenance
Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.
1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT
For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.
Warranty Plus Extends your warranty up to 3 years, next working day replacement Warranty Plus Extends your warranty up to 5 years, next working day replacement Intervention, Provides one preventative maintenance visit, planned visit Battery Plus, Provides replacement batteries to site, next working day replacement Warranty One Extends your warranty up to 1 year, next working day replacement 2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT
No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.
Services Included
Silver Level
Gold Level
Platinum Level
Technical Hotline 24/7 Yes Yes Yes Preventative Maintenance Yes Yes Yes Remote Monitoring 24/7 Yes Yes Yes Firmware Upgrades Yes Yes Yes Emergency Response Yes Yes Yes Labour Yes Yes Yes Parts Yes Yes Yes Monthly Event/Status Report option option option Onsite Crash Kit option option option Response Time 12 working hours 8 working hours 4 clock hours 3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT
Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.
Engineer Installation and configuration during normal hours 24×7 flexible status and remote monitoring. Encrypted communication, allowing safe offsite monitoring Alarms and events emailed and SMS texted automatically Firewall Friendly Cloud based status overview and multiple sites status on one screen Allows First Fix Response to Site 4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.
Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.
Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.
- DownloadsBack-UPS CS 350/500 Russia 230 V (Sheet) Smart-UPS Safety Guide - Smart-UPS & Back-UPS (Sheet) Back-UPS CS 325I, 475I Sheet CB Certificate Back-UPS CS 500, 350, 325 230V Nemko GS certificate Back-UPS 325, 230V, IEC 320, without auto shutdown software EMC Certificate of Approval for Back-UPS CS 325/350 VA 230 Volts EoLi - Back-UPS Profile 1 ePEP - Product Environmental Profile 1 for Back-UPS End of Life instructions for BACK UPS _EN
Customers also bought…
-
Eaton 9PX 1000i RT2U Netpack
9PX1000IRTN
£1,001.14 Ex. VAT £1,201.37 Inc. VAT Add to basket -
APC Back-UPS 350, 230V
BK350EI
£93.71 Ex. VAT £112.45 Inc. VAT Add to basket -
Eaton 9PX 1000i RT2U
9PX1000IRT2UBS
£903.00 Ex. VAT £1,083.60 Inc. VAT Add to basket -
Tripp Lite UPS Replacement Battery Cartridge for select APC UPS, 5.5 lbs
RBC2A
£40.91 Ex. VAT £49.09 Inc. VAT Add to basket -
CPS Standard UK Plug to C13 10A Cable (2 Metres)
CPS-UK010-200
£10.95 Ex. VAT £13.14 Inc. VAT Add to basket -
Cable IEC c14 male to 13a 4 way extension block – LP600098A
LP600098A
£24.22 Ex. VAT £29.06 Inc. VAT Add to basket -
CSB RBC2 Replacement Battery
CSB RBC2
£33.36 Ex. VAT £40.03 Inc. VAT Add to basket -
APC Replacement Battery Cartridge #2 with 2 Year Warranty
RBC2
£58.67 Ex. VAT £70.40 Inc. VAT Add to basket
Our brands
Shown below is a small selection of some of our customers we have helped through understanding clients challenges and implementing our unique approach to helping clients built around: listening to our clients, understanding the challenges they face and providing a range of options which compliments their requirements. Our aim is not to sell products but provide solutions with the help of our in house Power Consultants and Electricians.






