APC Back-UPS 650, 230V - BK650EI
£138.55 Ex. VAT £166.26 Inc. VAT
162 in stock
All major debit and credit cards accepted.
Next working day delivery - - Available on orders placed Monday-Friday before 4:30pm
Next working day delivery available on orders placed Monday-Friday before 4:30pm
Back-UPS Features & Benefits
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Surge only outlets Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes .
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
LED status display Quickly understand unit and power status with visual indicators.
Audible alarms Provides notification of changing utility power and UPS power conditionsTechnical Data
Max Configurable Power (Watts) 400 Watts
Output Frequency (sync to mains) 47 – 63 Hz Sync to mains, 50/60 Hz +/- 1 Hz Unsynchronised Topology Standby Waveform type Stepped approximation to a sinewave Transfer Time 6 ms typical : 10 ms maximum
Input frequency 47 – 63 Hz, 50/60 Hz +/- 3 Hz Auto-sensing Input voltage range for main operations 160 – 286 Adjustable, 180 – 266V Number of Power Cords 2
Batteries & Runtime
Battery type Lead-acid battery Typical recharge time 8hour(s) Nominal Battery Voltage 12 V Replacement Battery RBC17 Expected Battery Life (years) 4 – 6 RBC Quantity 1 Battery Charge Power (Watts) 12 Watts Battery Volt-Amp-Hour Capacity 95 Runtime View Runtime Graph Efficiency View Efficiency Graph
Communications & Management
Interface Port(s) Optional Simple Signalling RS232 cable, USB Control panel LED status display with on line : on battery : replace battery and overload indicators Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating 310Joules Data Line Protection RJ45 analog phone line for phone/fax/modem/DSL
Maximum Height 165MM, 16.5CM Maximum Width 91MM, 9.1CM Maximum Depth 284MM, 28.4CM Net Weight 6.03KG Shipping weight 7.31KG Shipping Height 494MM, 49.4CM Shipping Width 185MM, 18.5CM Shipping Depth 415MM, 41.5CM Color Beige Master Carton Units 1.0 Master Carton Weight 7.3 Units per Pallet 48.0 SCC Codes 10731304219788
Operating Temperature 0 – 40 °C Operating Relative Humidity 5 – 95 % Operating Elevation 0 – 3048meters Storage Temperature -15 – 45 °C Storage Relative Humidity 5 – 95 % Storage Elevation 0 – 15240meters Audible noise at 1 meter from surface of unit 45.0dBA
Approvals A-Tick, C-Tick, CE, GOST, NEMKO Equipment protection policy Lifetime : 100000 euros, Lifetime : 50000 GBP Standard warranty 2 years repair or replace
Sustainable Offer Status
RoHS CompliantOnsite Maintenance
Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.
1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT
For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.
Warranty Plus Extends your warranty up to 3 years, next working day replacement Warranty Plus Extends your warranty up to 5 years, next working day replacement Intervention, Provides one preventative maintenance visit, planned visit Battery Plus, Provides replacement batteries to site, next working day replacement Warranty One Extends your warranty up to 1 year, next working day replacement
2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT
No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.
Technical Hotline 24/7 Yes Yes Yes Preventative Maintenance Yes Yes Yes Remote Monitoring 24/7 Yes Yes Yes Firmware Upgrades Yes Yes Yes Emergency Response Yes Yes Yes Labour Yes Yes Yes Parts Yes Yes Yes Monthly Event/Status Report option option option Onsite Crash Kit option option option Response Time 12 working hours 8 working hours 4 clock hours
3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT
Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.
Engineer Installation and configuration during normal hours 24×7 flexible status and remote monitoring. Encrypted communication, allowing safe offsite monitoring Alarms and events emailed and SMS texted automatically Firewall Friendly Cloud based status overview and multiple sites status on one screen Allows First Fix Response to Site
4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.
Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.
Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.DownloadsSmart-UPS Safety Guide - Smart-UPS & Back-UPS (Sheet) Back-UPS CS 230 V (Manual) Back-UPS BK350EI, BK500EI, BK650EI Specification Sheet CB certificate for APC BACK-UPS 650VA 230V Back-UPS 650VA 230V CTick Certificate of Approval for BK650EI GS Certificate for Back-UPS 650VA 230V EAC certificate for BackUPS ePEP - Product Environmental Profile 1 for Back-UPS Product Environmental Profile for BACK UPS _ENReviews (0)
Shown below is a small selection of some of our customers we have helped through understanding clients challenges and implementing our unique approach to helping clients built around: listening to our clients, understanding the challenges they face and providing a range of options which compliments their requirements. Our aim is not to sell products but provide solutions with the help of our in house Power Consultants and Electricians.