Gone in a FLASH

Black Friday Deals

SKU: BV500I-MS Categories: , , , Brand: APC Tag:

APC EASY UPS BV 500VA, AVR, Universal Outlet, 230V - BV500I-MS

We are an APC Premier Partner!

This product has been Discontinued


    • Description

      Easy UPS Features & Benefits

      Manageability

      Audible alarms Provides notification of changing utility power and UPS power conditions

      LED Indicators Provide easy-to-read status of the unit and utility power conditions.

      Protection

      Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes .

      Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

      Availability

      Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

      Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

      Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance

      Features

      Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

      Cold-start capable Provides temporary battery power when the utility power is out.

      Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

      Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.

      Safety

      Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

    • Technical Data

      Output

      Max Configurable Power (Watts)300 Watts
      / 500VA
      Output Frequency (sync to mains)50/60 Hz +/- 1 Hz Unsynchronised
      TopologyLine interactive
      Waveform typeStepped approximation to a sinewave
      Transfer Time6 ms typical : 10 ms maximum

      Input

      Input frequency50/60 Hz +/- 5 Hz Auto-sensing
      Input voltage range for main operations170 – 280V
      Number of Power Cords1

      Batteries & Runtime

      Battery typeLead-acid battery
      Typical recharge time8hour(s)
      Nominal Battery Voltage12 V
      Expected Battery Life (years)3 – 5
      EfficiencyView Here
    • Onsite Maintenance

      Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.

      1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT

      For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

      Warranty Plus Extends your warranty up to 3 years, next working day replacementGreen tick
      Warranty Plus Extends your warranty up to 5 years, next working day replacementGreen tick
      Intervention, Provides one preventative maintenance visit, planned visitGreen tick
      Battery Plus, Provides replacement batteries to site, next working day replacementGreen tick
      Warranty One Extends your warranty up to 1 year, next working day replacementGreen tick

      2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

      No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

      Services Included

      Silver Level

      Gold Level

      Platinum Level

       

      Technical Hotline 24/7YesYesYesGreen tick
      Preventative MaintenanceYesYesYesGreen tick
      Remote Monitoring 24/7YesYesYesGreen tick
      Firmware UpgradesYesYesYesGreen tick
      Emergency ResponseYesYesYesGreen tick
      LabourYesYesYesGreen tick
      PartsYesYesYesGreen tick
      Monthly Event/Status ReportoptionoptionoptionGreen tick
      Onsite Crash KitoptionoptionoptionGreen tick
      Response Time12 working hours8 working hours4 clock hoursGreen tick

      3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

      Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

      Engineer Installation and configuration during normal hoursGreen tick
      24×7 flexible status and remote monitoring.Green tick
      Encrypted communication, allowing safe offsite monitoringGreen tick
      Alarms and events emailed and SMS texted automaticallyGreen tick
      Firewall FriendlyGreen tick
      Cloud based status overview and multiple sites status on one screenGreen tick
      Allows First Fix Response to SiteGreen tick

      4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

      Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

      Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

    • Downloads
    Trustpilot

    Customers also bought…

    We are here when you need us most

    As a client of Critical Power Supplies you can expect 24×7 support whether on the phone, email or on site because we always deliver on our promise to keep you operational and your satisfaction is paramount to everything we do.

    Contact us

    Related products

    Our brands

    Shown below is a small selection of some of our customers we have helped through understanding clients challenges and implementing our unique approach to helping clients built around: listening to our clients, understanding the challenges they face and providing a range of options which compliments their requirements. Our aim is not to sell products but provide solutions with the help of our in house Power Consultants and Electricians.

    ABB
    APC
    Eaton
    Riello UPS
    Salicru
    Vertiv