SKU: PowerPro EL100XA Categories: , , Tag:

BPC Energy PowerPro EL100XA Series 500VA-3kVA - PowerPro EL100XA

Find out how you can order below

How to buy

  • Description

    The significant advantage of using PowerPro EL Static Inverters for Emergency Lighting is the ability to supply tightly regulated and controlled sinewave power to a wide range of normal functional or decorative mains luminaires as emergency fittings.

    As an expansion to the standard 100 series, the XA range allows for an internal self-contained battery system capable of providing the standard Emergency Lighting 3-hour autonomies. With the advantage of wall-mounted and stand-alone options, the XA range completes the EL series with a fully encapsulated product for those lower rated requirements.

    EL100 models have single-phase rectifiers with “Soft Start” control incorporating thyristor controlled bridge circuitry to limit inrush current and prevent overloading marginally rated mains supplies. These models provide an excellent solution for, single-phase loads and can also reduce the need for extensive re-cabling during installation.

    • True sinewave and PWM microprocessor controlled technology
    • System and battery test function
    • DC short circuit protection
    • Recharge batteries up to 80% within 20 hours
    • A fast changeover to Battery Mode
    • Built-in distribution panel (6x standard)
    • LCD panel providing accurate detailed information about load, batteries, system diagnostics & audible alarm
    • RS232 and dry contacts for communication and remote monitoring
    • Internal battery compartment
    • Reduced mean time to repair (MTTR) due to modular design
  • Technical Data
    MODELEL 1005XAEL 1012XAEL 1030XA
    Power Rating VA / Watts500 / 4001250 / 10003000 / 2400
    INPUT
    Nominal Voltage230 Vac (1Ph + N + PE)
    Voltage Range184V – 285V
    Frequency Range50Hz +5%
    OUTPUT
    Nominal Voltage230 Vac
    AC Voltage Regulation         (Battery Mode)+3%
    Frequency Range (Battery Mode)+1%
    Power Factor0.8
    Crest Factor3:1
    Harmonic Distortion (Linear Load)<5%
    Transfer Time0.5 secs
    WaveformSinewave
    Load Circuits6
    Overload120% continuous
    Mode OperationChangeover
    Maintained / Non-MaintainedMaintained (standard) / Non-Maintained (optional)
    BATTERY
    Battery TypeVRLA AGM Sealed Lead Acid Maintenance Free Batteries / Nickel Cadmium Batteries / Plante Batteries
    Internal / External1 or 3 hour internal
    End of Life to EN50171Included
    Charge Battery to 80% within 2 hoursIncluded
    Deep Discharge ProtectionIncluded
    DC Earth LeakageOptional
    LIGHTING CONTROL INTERFACE
    External Mains Fail Test ConnectionOptional
    Non-Maintained Mode Connection**Optional
    FAR Connection**Optional
    External Phase Fail Connection**Optional
    24Vdc Supply for External ContactorOptional
    KNX InterfaceOptional
    Volt Free Contacts3
    GENERAL
    Operating Temperature0 – 40°C
    Operating Humidity5 – 95% (non-condensed)
    Acoustic Noise<56db 1=”” metre=”” td=””>
    Protection DegreeIP21
    Dimension (mm) WxDxH   (Excluding Batteries)750 x 250 x 850750 x 250 x 1250750 x 400 x 1250
    Net Weight (kgs)Dependent of battery configuration
  • Onsite Maintenance

    Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.

    1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT

    For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

    Warranty Plus Extends your warranty up to 3 years, next working day replacementGreen tick
    Warranty Plus Extends your warranty up to 5 years, next working day replacementGreen tick
    Intervention, Provides one preventative maintenance visit, planned visitGreen tick
    Battery Plus, Provides replacement batteries to site, next working day replacementGreen tick
    Warranty One Extends your warranty up to 1 year, next working day replacementGreen tick

    2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

    No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

    Services Included

    Silver Level

    Gold Level

    Platinum Level

     

    Technical Hotline 24/7YesYesYesGreen tick
    Preventative MaintenanceYesYesYesGreen tick
    Remote Monitoring 24/7YesYesYesGreen tick
    Firmware UpgradesYesYesYesGreen tick
    Emergency ResponseYesYesYesGreen tick
    LabourYesYesYesGreen tick
    PartsYesYesYesGreen tick
    Monthly Event/Status ReportoptionoptionoptionGreen tick
    Onsite Crash KitoptionoptionoptionGreen tick
    Response Time12 working hours8 working hours4 clock hoursGreen tick

    3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

    Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

    Engineer Installation and configuration during normal hoursGreen tick
    24×7 flexible status and remote monitoring.Green tick
    Encrypted communication, allowing safe offsite monitoringGreen tick
    Alarms and events emailed and SMS texted automaticallyGreen tick
    Firewall FriendlyGreen tick
    Cloud based status overview and multiple sites status on one screenGreen tick
    Allows First Fix Response to SiteGreen tick

    4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

  • Downloads
  • Reviews (0)
    Product Reviews

    Reviews

    There are no reviews yet.

    Be the first to review “BPC Energy PowerPro EL100XA Series 500VA-3kVA”

    Your email address will not be published.

    Company Reviews

We are here when you need us most

As a client of Critical Power Supplies you can expect 24×7 support whether on the phone, email or on site because we always deliver on our promise to keep you operational and your satisfaction is paramount to everything we do.

Contact us