SKU: PowerPro ELMOD Categories: , , Tag:

BPC Energy PowerPro ELMod Series 4kVA-24kVA - PowerPro ELMOD

Find out how you can order below

How to buy

  • Description

    The Power Pro EL Modular Series is an emergency lighting Inverter that can be configured between 4 – 24kVA with incremental steps of 4kVA power.
    Designed with high fault clearance capability and operation with high inrush light fittings.

    The adaptability of the ELMOD system provides three modes of operation as standard and the ability to convert from single phase input to three-phase input without modification.

    Low MTTR (Mean Time To Repair) is achieved with all electronic components in a modular format and complete front access.

    • 24kVA power cabinet, built up of 4kVA power modules
    • 1/1 and 3/1 configuration display
    • Hot-Swap power modules
    • True sinewave output
    • Output configurable to 3 modes of operation (Changeover / Inverter / Non-Maintained)
    • Deep discharge protection
    • Reverse battery polarity protection
    • Front access for maintenance and repair
    • Battery short circuit protection
    • Multiple communication options RS232, RS485, dry contacts, TCP/IP Adapter for local and remote communication
  • Technical Data
    Power Rating kVA/kW4 / 3.68 / 7.212 / 10.816 / 14.420 / 1824 / 16
    Nominal Voltage220/230/240 Vac (1Ph+N+PE)220/230/240 Vac (1Ph+N+PE) or (3Ph+N+PE)220/230/240 Vac (1Ph+N+PE)220/230/240 Vac (1Ph+N+PE) or (3Ph+N+PE)
    Voltage Range+25%
    Frequency Range50Hz +10%, 60Hz +10%
    Nominal Voltage220/230/240 Vac
    AC Voltage Regulation+1%
    Frequency Range+4% (+0.2% battery supply)
    Power Factor0.9
    Crest Factor3:1
    Harmonic Distortion (Linear Load)<1%
    Transfer Time<0ms
    Load Circuits1
    Overload120% continuous, 150% for 10 mins, 175% for 1 min
    Mode OperationChangeover, Inverter and Non-Maintained selectable
    Maintained / Non-MaintainedMaintained and Non-Maintained (standard)
    Battery TypeVRLA AGM Maintenance Free Sealed Lead Batteries, Nickel Cadmium or Plante
    Internal / External1 or 3 hour external
    End of Life to EN50171Included
    Charge Battery to 80% within 12 hoursIncluded
    Deep Discharge ProtectionIncluded
    DC Earth LeakageOptional
    External Mains Fail Test ConnectionIncluded
    Non-Maintained Mode Connection**Optional
    FAR Connection**Optional
    External Phase Fail Connection**Optional
    24Vdc Supply for External ContactorOptional
    KNX / DALI / NODE InterfaceOptional
    Mains Fail Test ButtonKey switch with 10min / 1hr / 3hr time delay included
    Volt Free Contacts3
    Operating Temperature-5°C to 40°C / <1000m above=”” sea=”” leve=”” –1000m–=””>
    Operating Humidity<93% non-condensing
    Acoustic Noise<55db at=”” 1=”” metre=”” –55db–=””>
    Protection DegreeIP21
    Dimensions (mm) WxDxH510 x 850 x 1340
    Weight (kgs) Excluding Batteries107114121128135142

    ** Only applicable if Non-Maintained Contactor Option fitted

  • Onsite Maintenance

    Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.

    1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT

    For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

    Warranty Plus Extends your warranty up to 3 years, next working day replacementGreen tick
    Warranty Plus Extends your warranty up to 5 years, next working day replacementGreen tick
    Intervention, Provides one preventative maintenance visit, planned visitGreen tick
    Battery Plus, Provides replacement batteries to site, next working day replacementGreen tick
    Warranty One Extends your warranty up to 1 year, next working day replacementGreen tick

    2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

    No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

    Services Included

    Silver Level

    Gold Level

    Platinum Level


    Technical Hotline 24/7YesYesYesGreen tick
    Preventative MaintenanceYesYesYesGreen tick
    Remote Monitoring 24/7YesYesYesGreen tick
    Firmware UpgradesYesYesYesGreen tick
    Emergency ResponseYesYesYesGreen tick
    LabourYesYesYesGreen tick
    PartsYesYesYesGreen tick
    Monthly Event/Status ReportoptionoptionoptionGreen tick
    Onsite Crash KitoptionoptionoptionGreen tick
    Response Time12 working hours8 working hours4 clock hoursGreen tick

    3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

    Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

    Engineer Installation and configuration during normal hoursGreen tick
    24×7 flexible status and remote monitoring.Green tick
    Encrypted communication, allowing safe offsite monitoringGreen tick
    Alarms and events emailed and SMS texted automaticallyGreen tick
    Firewall FriendlyGreen tick
    Cloud based status overview and multiple sites status on one screenGreen tick
    Allows First Fix Response to SiteGreen tick

    4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

  • Downloads
  • Reviews (0)
    Product Reviews


    There are no reviews yet.

    Be the first to review “BPC Energy PowerPro ELMod Series 4kVA-24kVA”

    Your email address will not be published.

    Company Reviews

We are here when you need us most

As a client of Critical Power Supplies you can expect 24×7 support whether on the phone, email or on site because we always deliver on our promise to keep you operational and your satisfaction is paramount to everything we do.

Contact us