IoT SD monitoring unit - 1x 4-20mA input, WiFi, Eth with PoE. Retail package including a power adaptor. Web portal HWg-cloud.com (for free) + SensDesk technology supported. - HWG-600806
Find out how you can order belowHow to buy
Isolated DC current sensor for the 1Wire-UNI bus. Sensor for measuring currents in the 0–20mA range. It is typically used to connect an industrial probe with 4–20mA output – 2wire current loop (“sink”type). Sensor current output is processed in Poseidon2 or Ares units to ber accessible via LAN or GSM.
The sensor is equipped with 8-points calibrating table/curve to set measured output appropriate to related industrial sensors. The calibration process is supported by 1W-UNI USB calibrator.USB dongle.
For 4-wire industrial sensors 0-20mA use alternative Sensor 0-20mA 1W-UNI.Features:
Applications and usage:
- Input: 4-20mA (connect a “sink” type of probe).
- Electrical isolation
- Protection: 63 mA fuse
- Options: Unit conversion, calibration
- Interface: 1-Wire UNI (2x RJ11 for daisy-chaining)
- Connects to: Ares 12/14, Poseidon2 or Poseidon 2250
- Environment: Converter to be installed indoors
- Power: Requires an external 12-30V supply.
- Connecting industrial sensors to Poseidon or Ares systems
- Measuring fuel level in a tank
- Measuring the concentration of CO2 or other gases
- Connecting pressure transducers, pH sensors, or other industrial sensors
- Onsite Maintenance
Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.
1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT
For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.
Warranty Plus Extends your warranty up to 3 years, next working day replacement Warranty Plus Extends your warranty up to 5 years, next working day replacement Intervention, Provides one preventative maintenance visit, planned visit Battery Plus, Provides replacement batteries to site, next working day replacement Warranty One Extends your warranty up to 1 year, next working day replacement
2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT
No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.
Technical Hotline 24/7 Yes Yes Yes Preventative Maintenance Yes Yes Yes Remote Monitoring 24/7 Yes Yes Yes Firmware Upgrades Yes Yes Yes Emergency Response Yes Yes Yes Labour Yes Yes Yes Parts Yes Yes Yes Monthly Event/Status Report option option option Onsite Crash Kit option option option Response Time 12 working hours 8 working hours 4 clock hours
3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT
Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.
Engineer Installation and configuration during normal hours 24×7 flexible status and remote monitoring. Encrypted communication, allowing safe offsite monitoring Alarms and events emailed and SMS texted automatically Firewall Friendly Cloud based status overview and multiple sites status on one screen Allows First Fix Response to Site
4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.
Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.
Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.
- Reviews (0)
Shown below is a small selection of some of our customers we have helped through understanding clients challenges and implementing our unique approach to helping clients built around: listening to our clients, understanding the challenges they face and providing a range of options which compliments their requirements. Our aim is not to sell products but provide solutions with the help of our in house Power Consultants and Electricians.