SKU: HWG-600696 Categories: , Tag:

IoT SD monitoring unit - 1x WLD (Water Leak Detection) zone input for sensing cable, WiFi, Eth and PoE. Plain unit. Web portal HWg-cloud.com (for free) + SensDesk technology supported. - HWG-600696

Find out how you can order below

How to buy

  • Description

    SD-WLD is a simple detector that detects water leaks using a moisture-sensing cable. It allows connecting 1 sensing cable of up to 85m in length. The total wiring length can be up to 185m (85m sensing cable + 100m connecting cable).

    The sensing cable detects as little as a few drops of conductive liquid, so it can be also used to detect condensation. 

    Thanks to early detection and alerting, SD-WLD can prevent substantial damages caused by unexpected adverse environmental conditions.

    For configuration, SD-WLD features a built-in web server and WiFi connectivity. The device can be monitored remotely over the Internet using any SensDesk Technology portal and the SensDeskMobile app.  

    If the device is correctly configured in the SensDesk portal, it can send an e-mail alert whenever the specified range of values is exceeded. If you also use our SMS-GW3 together with the portal, the alerts can be also sent as text messages (SMS).  

    Features: 
    • Wired Ethernet as well as WiFi – 802.11 b/g/n (2.4GHz)
    • Support for simultaneous Ethernet and WiFi operation (for easy setup)
    • 5V or PoE power
    • Simple installation, supports DHCP
    • Embedded WEB server
    • Security protected with a password
    • Support for the SensDesk portal
    Applications and usage: 
    • Leaky pipe detection (cable wrapped along the pipe)
    • Flood detection in an area: WLD detection cable laid along the walls in a room
    • Under raised floors
    • Above suspended ceilings
    • Detection of water leaks in drip trays
    • Detection of water leaks under air-conditioning outlets
    • Detection of water flood in a freezing or cooling plant
  • Onsite Maintenance

    Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.

    1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT

    For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

    Warranty Plus Extends your warranty up to 3 years, next working day replacementGreen tick
    Warranty Plus Extends your warranty up to 5 years, next working day replacementGreen tick
    Intervention, Provides one preventative maintenance visit, planned visitGreen tick
    Battery Plus, Provides replacement batteries to site, next working day replacementGreen tick
    Warranty One Extends your warranty up to 1 year, next working day replacementGreen tick

    2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

    No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

    Services Included

    Silver Level

    Gold Level

    Platinum Level

     

    Technical Hotline 24/7YesYesYesGreen tick
    Preventative MaintenanceYesYesYesGreen tick
    Remote Monitoring 24/7YesYesYesGreen tick
    Firmware UpgradesYesYesYesGreen tick
    Emergency ResponseYesYesYesGreen tick
    LabourYesYesYesGreen tick
    PartsYesYesYesGreen tick
    Monthly Event/Status ReportoptionoptionoptionGreen tick
    Onsite Crash KitoptionoptionoptionGreen tick
    Response Time12 working hours8 working hours4 clock hoursGreen tick

    3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

    Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

    Engineer Installation and configuration during normal hoursGreen tick
    24×7 flexible status and remote monitoring.Green tick
    Encrypted communication, allowing safe offsite monitoringGreen tick
    Alarms and events emailed and SMS texted automaticallyGreen tick
    Firewall FriendlyGreen tick
    Cloud based status overview and multiple sites status on one screenGreen tick
    Allows First Fix Response to SiteGreen tick

    4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

  • Reviews (0)
    Product Reviews

    Reviews

    There are no reviews yet.

    Be the first to review “IoT SD monitoring unit – 1x WLD (Water Leak Detection) zone input for sensing cable, WiFi, Eth and PoE. Plain unit. Web portal HWg-cloud.com (for free) + SensDesk technology supported.”

    Your email address will not be published.

    Company Reviews

We are here when you need us most

As a client of Critical Power Supplies you can expect 24×7 support whether on the phone, email or on site because we always deliver on our promise to keep you operational and your satisfaction is paramount to everything we do.

Contact us