Tripp Lite Isolator Series Dual-Voltage 115/230V 300W 60601-1 Medical-Grade Isolation Transformer, C14 Inlet, 4 C13 Outlets - IS300HGDV
- Available to order.
- ETA will be advised upon ordering or call us on 0800 978 8988 for leadtime.
£598.98 Ex. VAT £718.78 Inc. VAT
All major debit and credit cards accepted.
- DescriptionFull CAN/ES/IEC/EN 60601-1 Medical-Grade Listing with C14 Inlet and 4 C13 Outlets
Selectable 115/230V Input/Output Voltage Suitable for Most Applications
- Ideal for protecting sensitive electronic equipment in patient-care vicinities
- Reduces cumulative leakage current of Isolator and connected equipment to levels less than 50 µA
- Inexpensive alternative to dedicated circuits and site electrical upgrades
- Rugged all-metal housing designed to withstand frequent use in busy environments
- Requires a C13 AC input cord with country specific plug (sold separately)
Protects Connected Equipment from Dangerous Spikes, Surges and Line Noise
- Step-up, step-down or pass-through voltage operation (input frequency always equals output frequency)
- Internal low-impedance toroidal isolation transformer with Faraday shield offers 100% isolation from mains AC power line
- Automatically shuts down all outlets in case of overload
- Ships ready for placement in any industrial, medical, office, network or audio/video environment
- Line isolation, continuous noise filtering and 240 joules of AC surge protection
- Removes EMI/RFI noise, utility switching transients, load-generated harmonics and ground loops
- Floating AC output prevents noise coupling from noisy ground circuits
- Reduces 6000V IEEE 587 Category A and B ring wave and combination wave test surges to only 0.5V common mode
- Technical Data
UPC Code 037332199980 Nominal Voltage / Frequency 115/230 VAC 50/60 HZ (Voltage Selected by Input Power Module Fuse Installation VA / Watt Capacity 300 Transformer Type Medical Grade, Low Impedence Toroid- Line Isolation (Pass Through or Step UP or Step Down)
Nominal Input Voltage Description 115/230 VAC (Selected by Input Power Module Fuse Installation) Operating Input Voltage Range 100-125Vac or 200-250VAC Input Frequency 50/60HZ Maximum Surge Amps 70A Input Current 3.15A @ 115V / 1.6A @ 230V THDi Less than 1% Power Input Receptacle IEC-320-C14
Output Voltage Regulation (Line Mode) 5.2% Output (VA) 300 Output (Watts) 300 Output Receptacles (4) C13 Output Nominal Voltage 115V/230V (Selected by Output Switch) Can also be step up or step down, Selected when Installing Fuses. Outlet Details Qty 4 Receptacles
Output Isolation Transformer Toroid with AC output Floating with Respect to Earth Ground. POAG and Earth Ground Studs. Leakage Current Max AC Leakage Current 50 (uA)
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 240 IEEE587 Cat. A Ringwave Let-Through Reduced to 0.5v Common Mode Noise Suppression Rating 35-65db
Color White Material of Construction Metal (Cabinet) Cooling Method Convection Shipping Dimensions (hwd / cm) 21.01 x 24.99 x 32.51 Shipping Weight (kg) 6.18 Unit Dimensions (hwd / cm) 11 x 15 x 20 Unit Weight (kg) 5.60
Operating Temperature Range 0 C-40 C(32F to 104F), Intended Application is in a controlled environment at approx. 25 C. Storage Temperature Range -15 C to 50 C (5F to 122F) Operating Elevation (m) 0-3000M (0-10,000 Ft) Operating Humidity Range 5% to 95% RH (Non-Condensing)
FEATURES & SPECIFICATIONS
Over Current Protection 2X 3.15A @ 115V and 2X 1.6A at 230V ( Both Fuses included with Product as Accesories)
System Type Selections Input Voltage equals Output Voltage OR 120V input equals 230V output OR 230V Input equals 120V output – (Selectable when installing Fuses) Input Frequency always equals Output Frequency
STANDARDS & COMPLIANCE
Certifications Tested to ANSI/AAMI ES60601-1:2005+A2+A1, IEC60601-1 3RD EDITION +A1, cAN/CSA-C22.2 NO. 60601-1:14, CE, NOM
Product Warranty Period (Worldwide) 2-year limited warranty
- Onsite Maintenance
Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.
1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT
For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.
Warranty Plus Extends your warranty up to 3 years, next working day replacement Warranty Plus Extends your warranty up to 5 years, next working day replacement Intervention, Provides one preventative maintenance visit, planned visit Battery Plus, Provides replacement batteries to site, next working day replacement Warranty One Extends your warranty up to 1 year, next working day replacement
2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT
No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.
Technical Hotline 24/7 Yes Yes Yes Preventative Maintenance Yes Yes Yes Remote Monitoring 24/7 Yes Yes Yes Firmware Upgrades Yes Yes Yes Emergency Response Yes Yes Yes Labour Yes Yes Yes Parts Yes Yes Yes Monthly Event/Status Report option option option Onsite Crash Kit option option option Response Time 12 working hours 8 working hours 4 clock hours
3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT
Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.
Engineer Installation and configuration during normal hours 24×7 flexible status and remote monitoring. Encrypted communication, allowing safe offsite monitoring Alarms and events emailed and SMS texted automatically Firewall Friendly Cloud based status overview and multiple sites status on one screen Allows First Fix Response to Site
4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.
Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.
Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.
- Reviews (0)
Shown below is a small selection of some of our customers we have helped through understanding clients challenges and implementing our unique approach to helping clients built around: listening to our clients, understanding the challenges they face and providing a range of options which compliments their requirements. Our aim is not to sell products but provide solutions with the help of our in house Power Consultants and Electricians.