Riello Master Plus MPM 60kVA Online 230V (No Internal Batteries) - MPM 60

Find out how you can order below

How to buy

  • Description

    MPM 60 Overview

    The Master MPS series of UPS offer maximum power for mission-critical environments such as data centres, telecoms networks, security systems, electro-medical devices, and industrial applications.

    Online double conversion UPS technology protects against power failures and eliminates mains disruptions like harmonics, making it a proven choice for systems powered by generators or MV/LV transformers. Easily installed in a wide range of configurations and architectures, with up to 8 units capable of operating in parallel for additional capacity or redundancy.


    • Up to 8 Master MPS can be installed in parallel for extra capacity or redundancy.
    • Hot System Expansion (HSE) add UPS into an existing system with the need to transfer to bypass.
    • Available as either three-phase input and output or three-phase input, single-phase output.
    • Efficiency Control System (ECS) optimises efficiency based on the power required by the load.
    • Delivers quality power in mission-critical environments like data centres, telecoms networks, security systems, electro-medical devices, and industrial applications.

    Possible Configurations

    MPM 60Standard 60kVA UPS with 6 Pulse Rectifier and 384VDC Battery
    MPM 60 HCIncludes a Harmonic Compensation Filter which reduces THDi to less than 5%. This model is wider than the other models (825mm Wide).

  • Technical Data
    Voltage380 – 400 – 415 Vac three-phase
    Frequency45 – 65 Hz
    Frequency tolerance 2% (selectable from 1% to 5% from front panel)
    Soft start0 – 100% in 120 (selectable)
    Voltage Range400 V + 20% /- 25%
    Rated voltage360-400-420 Vac three-phase + N
    Rated frequency50 or 60 Hz (selectable)
    Rated power60000 VA
    Active power54000 W
    Crest factor (Ipeak/Irms)3:1
    Static stability 1%
    Dynamic stability 5% in 10 ms
    Frequency50 or 60 Hz (selectable)
    Voltage distortion with distorcing load< 3% with non-linear load
    Voltage distortion with linear load< 1% with linear load
    Frequency stability0.05%
    100% < Load < 110%60′
    125% = Load < 150%10′
    Load = 150%1′
    TypeVRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels
    ColorDark grey RAL 7016
    CommunicationDouble RS232 + dry contacts + 2 slots for communications interface
    Safety complianceEN 62040-1:2008; EN 62040-1/EC:2009; EN 62040-1/A1:2013 and Directive 2014/35/EU
    EMC conformanceEN 62040-2 and Directive 2014/30/EU
    Protection ratingIP20
    Line-Interactive/Smart Active efficiencyup to 98%
    Noise (at 1 m)62 dBA
    Operating temperature0 C/ +40 C
    Relative humidity<95% non-condensing
    Weight440 kg
    Dimensions (h w d)1400 x 800 x 740 mm
  • Onsite Maintenance

    Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.

    1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT

    For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

    Warranty Plus Extends your warranty up to 3 years, next working day replacementGreen tick
    Warranty Plus Extends your warranty up to 5 years, next working day replacementGreen tick
    Intervention, Provides one preventative maintenance visit, planned visitGreen tick
    Battery Plus, Provides replacement batteries to site, next working day replacementGreen tick
    Warranty One Extends your warranty up to 1 year, next working day replacementGreen tick

    2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

    No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

    Services Included

    Silver Level

    Gold Level

    Platinum Level


    Technical Hotline 24/7YesYesYesGreen tick
    Preventative MaintenanceYesYesYesGreen tick
    Remote Monitoring 24/7YesYesYesGreen tick
    Firmware UpgradesYesYesYesGreen tick
    Emergency ResponseYesYesYesGreen tick
    LabourYesYesYesGreen tick
    PartsYesYesYesGreen tick
    Monthly Event/Status ReportoptionoptionoptionGreen tick
    Onsite Crash KitoptionoptionoptionGreen tick
    Response Time12 working hours8 working hours4 clock hoursGreen tick

    3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

    Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

    Engineer Installation and configuration during normal hoursGreen tick
    24×7 flexible status and remote monitoring.Green tick
    Encrypted communication, allowing safe offsite monitoringGreen tick
    Alarms and events emailed and SMS texted automaticallyGreen tick
    Firewall FriendlyGreen tick
    Cloud based status overview and multiple sites status on one screenGreen tick
    Allows First Fix Response to SiteGreen tick

    4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

We are here when you need us most

As a client of Critical Power Supplies you can expect 24×7 support whether on the phone, email or on site because we always deliver on our promise to keep you operational and your satisfaction is paramount to everything we do.

Contact us