Riello Net Power 600VA Line Interactive 230V (UPS) - NPW 600

NPW 600 Overview

The Net Power 600 UPS is a perfect choice for any home or office UPS with line-interactive topology this provides you with a higher level of protection from power problems. The Net Power 600 has a power rating of 360 Watts, this allows for most IT equipment, TVs and games consoles to be powered during a power outage.

The Net Power 600 provides you with four outlets in a small form factor. These outlets will protect your electrical equipment from major power issues that you may experience; Power outages, power surges, overvoltages, power sags and brownouts.

Features and Benefits

• 5 Years Electronics Warranty (UK Only) and 3 Years Battery Warranty
• Stabilisation and filtering of the main power supply using AVR and EMI filters for the suppression of atmospheric disturbances.
• Ability to switch on the UPS in the absence of mains power (Cold Start).
• High reliability with built-in battery test.
• Auto-restart (when mains power is restored, after discharge of the batteries).
• Supplied with two IEC cables for powering the loads.

NOTE: The NPW 600, 800 and 1000 have LED indicators, not LCD displays.

Product Drawing

Main STAND-BY/ON switch GREEN LED: the UPS operates from the mains power supply RED LED: various messages (see the “Alarms and Report Signals table”) IEC mains input plug Input protection device Back-up sockets (IEC type) USB port RS232 Serial port (only for sizes 1000VA, 1500VA and 2000 VA)

Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.

1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT

For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

Warranty Plus Extends your warranty up to 3 years, next working day replacement
Warranty Plus Extends your warranty up to 5 years, next working day replacement
Intervention, Provides one preventative maintenance visit, planned visit
Battery Plus, Provides replacement batteries to site, next working day replacement
Warranty One Extends your warranty up to 1 year, next working day replacement

2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

Services Included	Silver Level	Gold Level	Platinum Level
Technical Hotline 24/7	Yes	Yes	Yes
Preventative Maintenance	Yes	Yes	Yes
Remote Monitoring 24/7	Yes	Yes	Yes
Firmware Upgrades	Yes	Yes	Yes
Emergency Response	Yes	Yes	Yes
Labour	Yes	Yes	Yes
Parts	Yes	Yes	Yes
Monthly Event/Status Report	option	option	option
Onsite Crash Kit	option	option	option
Response Time	12 working hours	8 working hours	4 clock hours

3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

Engineer Installation and configuration during normal hours
24×7 flexible status and remote monitoring.
Encrypted communication, allowing safe offsite monitoring
Alarms and events emailed and SMS texted automatically
Firewall Friendly
Cloud based status overview and multiple sites status on one screen
Allows First Fix Response to Site

4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.