SKU: SMX3000XLRT2U Categories: , , , , Brand: Tripp Lite Tag:

Tripp Lite SmartPro 230V 3kVA 2.25kW Line-Interactive Sine Wave UPS, 2U Rack/Tower, Extended Run, Network Card Options, USB, DB9 Serial - SMX3000XLRT2U

  • Order Now. Speak to a Specialist. Call 0800 978 8988.
  • ETA will be advised upon ordering or call us on 0800 978 8988 for leadtime.

Tailor to your needs. Speak to a Specialist.
Call: 0800 978 8988

Alternative Product

We have such a wide range of products that we need to discuss your requirements to give you a range of solutions best chosen to fit your needs.
Please call our team of experts on 0800 978 8988 to discus alternatives, lead-times and specifications.

  • Description
    • SMX3000XLRT2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
    • 3000VA/2250 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
    • Supports 2U rackmount installation in 4 post equipment racks, 2 post rackmount installation requires 2POSTRMKITWM, upright tower installation requires 2-9USTAND accessory
    • Large internal batteries support a half load of 1500VA for 10and a full load of 3000VA for 3.3
    • Runtime is further expandable with the addition of external battery packs BP48V24-2U , BP48V60RT-3Uand BP48V27-2US
    • Some external battery configurations require the use of Tripp Lite’s External Battery Configuration Software
    • Intelligent battery management system extends battery life
    • Maintains regulated 230V noal output during brownouts and overvoltages from 178 to 278V
    • Includes 9 UPS supported outlets arranged in 3 individually controllable load banksthat can be powered off and back on again via software interface
    • IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
    • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification, event logging and running user-defined script commands.
    • Offers simultaneous monitoring through included USB and DB9 interface ports, or the monitoring by any number of additional servers over IP with included PowerAlert monitoring software.
    • Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
    • Emergency Power Offinterface with cable
    • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for delayed or immediate reboot of connected devices
    • Supports Tripp Lite’s WatchDog software application to restore operation to locked equipment through soft reboot of application, OS or hard power off/on reboot of connected equipment – ideal for unattended kiosk applications
    • Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
    • Optional WEBCARDLXwith the latest version of PowerAlert Device Manager firmwareprovides enhanced remote management capabilities
    • PADM20 and PowerAlert Element Managerform a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations
    • IP-based Auto Probe detects lost connectivity and restores service autonomously
    • Emergency Power Offinterface with cable
    • Multi-function audible alarms and set of 5 front panel LEDs
    • Network-grade AC surge suppression
    • Attractive all-black color scheme
    • Optional PDUBHV20 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment
    • UPS battery set ships fully assembled, no time consug connection of internal batteries by user is necessary
  • Technical Data
    OVERVIEW
    UPC Code037332120502
    UPS TypeLine-Interactive
    INPUT
    Rated input current (Maximum Load)15A
    Nominal Input Voltage(s) Supported230V AC
    UPS Input Connection TypeC20 inlet
    UPS Input Connection DescriptionUser supplies input cabling with C19 output connection
    Input Circuit Breakers20A
    Input PhaseSingle-Phase
    OUTPUT
    Output Volt Amp Capacity (VA)3000
    Output Capacity (kVA)3
    Output Watt Capacity (Watts)2250
    Output kW Capacity (kW)2.25
    Output Capacity DetailsOutput is reduced to 1600W maximum when used with external battery packs
    Power Factor  0.75
    Nominal Voltage Details230v nominal inverter output voltage
    Frequency Compatibility50 / 60 Hz
    Frequency Compatibility DetailsAutomatic frequency selection
    Output Voltage Regulation (Line Mode)230V (-15%, +6% )
    Output Voltage Regulation (Battery Mode)+/- 5%
    Included Output Power CablesIncludes 3 C13 to C14 output power cables
    Load Management Receptacles  Three switchable two-outlet C13 load banks
    Output Circuit Breakers10A (x2) – each breaker protects 4 C13 outlets, C19 outlet does not include a breaker
    Output AC Waveform (AC Mode)Sine wave
    Output AC Waveform (Battery Mode)Pure Sine wave
    Nominal Output Voltage(s) Supported230V
    Output Receptacles(8) C13; (1) C19
    Individually Controllable Load Banks  Yes
    BATTERY
    Battery TypeValve Regulated Lead Acid (VRLA)
    Full Load Runtime (min.)  3.35 min. (2250w)
    Half Load Runtime (min.)  10 min. (1125w)
    Expandable Battery RuntimeExtended runtime supported via optional external battery packs
    Expandable RuntimeYes
    External Battery Pack Compatibility   BP48V24-2U  (limit 1);  BP48V60RT-3U  (multi-pack compatible);  BP48V27-2US  (multi-pack compatible)
    DC System Voltage (VDC)48
    Battery Recharge Rate (Included Batteries)Less than 4.5 hours from 10% to 90% (typical, full load discharge)
    Battery AccessFront panel battery access door
    Internal UPS Replacement Battery Cartridge RBC94-2U
    Battery Replacement DescriptionHot-swappable, user replaceable batteries
    VOLTAGE REGULATION
    Voltage Regulation DescriptionAutomatic voltage regulation (AVR) maintains line power operation with an input voltage range of 158 to 278
    Overvoltage Correction  Input voltages between 244 and 278 are reduced by 12%
    Undervoltage Correction  Input voltages between 182 and 206 are boosted by 12%
    Severe Undervoltage CorrectionInput voltages between 158 and 182 are boosted by 24%
    USER INTERFACE, ALERTS & CONTROLS
    Switches2 Switches control off/on power status and alarm-cancel/self-test operation; Rear dip-switch for charger rate adjustment
    Alarm Cancel OperationPower-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
    Audible AlarmAudible alarm indicates power-failure, overload and low-battery conditions
    LED Indicators5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
    SURGE / NOISE SUPPRESSION
    UPS AC Suppression Joule Rating480
    UPS AC Suppression Response TimeInstantaneous
    EMI / RFI AC Noise Suppression  Yes
    PHYSICAL
    Primary Form FactorRackmount
    Cooling MethodFan
    Included Mounting Accessory DescriptionIncluded 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
    Installation Form Factors Supported with Included Accessories4 post 19 inch rackmount
    Installation Form Factors Supported with Optional Accessories2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM )
    Minimum Required Rack Depth with External Battery Pack (cm)66
    Minimum Required Rack Depth with External Battery Pack (in.)26
    Minimum Required Rack Depth without External Battery Pack (cm)57
    Minimum Required Rack Depth without External Battery Pack (in.)22.5
    Optional Mounting Accessory NotesOptional  2-9USTAND  enables upright tower UPS placement;  2POSTRMKITWM  enables wall-mount and 2-post rackmount installation;  4POSTRAILKITWM  enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm);  UPSHDEARKIT  enables installation in 2 or 4-post racks using front vertical rails only, without rear support
    Primary UPS Depth (mm)483
    Primary UPS Height (mm)89
    Primary UPS Width (mm)445
    Rack Height2U
    Shipping Dimensions (hwd / cm)22.86 x 60.32 x 51.44
    Shipping Weight (kg)32.93
    UPS Housing MaterialSteel
    UPS Power Module Dimensions (hwd, cm)8.89 x 44.45 x 48.26
    UPS Power Module Weight (kg)29.03
    ENVIRONMENTAL
    Operating Temperature Range+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
    Storage Temperature Range+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
    Relative Humidity0 to 95%, non-condensing
    AC Mode BTU / Hr. (Full Load)  236.6
    AC Mode Efficiency Rating (100% Load)97%
    Audible Noise45 dBA maximum, front side 1m
    COMMUNICATIONS
    Network Monitoring Port DescriptionSupports detailed monitoring of UPS and site powe.r conditions; 1 USB port and 1 DB9 serial port.
    PowerAlert SoftwareIncluded
    Communications CableUSB and DB9 cabling included
    WatchDog CompatibilitySupports Watchdog application, OS and hard-reboot restart options for remote applications
    Network Management Card DescriptionNetwork management card optional
    Communications InterfaceDB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled)
    LINE / BATTERY TRANSFER
    Transfer Time  4 ms (AC to Battery); 2 ms (Battery to AC) typical
    Low Voltage Transfer to Battery Power (Setpoint)151
    High Voltage Transfer to Battery Power (Setpoint)282
    FEATURES & SPECIFICATIONS
    Grounding LugBack panel grounding lug
    Cold Start (Startup in Battery Mode During a Power Failure)Cold-start operation supported
    High Availability UPS Features  Auto Probe Monitoring and Reboot (requires WEBCARDLX); Automatic Voltage Regulation (AVR); Expandable battery backup; Hot swappable batteries; Remote management; Sine wave output; Surge/noise protection
    Green Energy-Saving FeaturesGreater than 95% efficiency – GREEN UPS; Individually controllable load banks
    STANDARDS & COMPLIANCE
    UPS CertificationsCE; Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances)
    Certification DetailsCE / IEC 62040-1, EN62040-2 (EMC)
    WARRANTY
    Product Warranty Period (International)2-year limited warranty
  • Onsite Maintenance

    Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.

    1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT

    For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

    Warranty Plus Extends your warranty up to 3 years, next working day replacementGreen tick
    Warranty Plus Extends your warranty up to 5 years, next working day replacementGreen tick
    Intervention, Provides one preventative maintenance visit, planned visitGreen tick
    Battery Plus, Provides replacement batteries to site, next working day replacementGreen tick
    Warranty One Extends your warranty up to 1 year, next working day replacementGreen tick

    2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

    No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

    Services Included

    Silver Level

    Gold Level

    Platinum Level

     

    Technical Hotline 24/7YesYesYesGreen tick
    Preventative MaintenanceYesYesYesGreen tick
    Remote Monitoring 24/7YesYesYesGreen tick
    Firmware UpgradesYesYesYesGreen tick
    Emergency ResponseYesYesYesGreen tick
    LabourYesYesYesGreen tick
    PartsYesYesYesGreen tick
    Monthly Event/Status ReportoptionoptionoptionGreen tick
    Onsite Crash KitoptionoptionoptionGreen tick
    Response Time12 working hours8 working hours4 clock hoursGreen tick

    3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

    Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

    Engineer Installation and configuration during normal hoursGreen tick
    24×7 flexible status and remote monitoring.Green tick
    Encrypted communication, allowing safe offsite monitoringGreen tick
    Alarms and events emailed and SMS texted automaticallyGreen tick
    Firewall FriendlyGreen tick
    Cloud based status overview and multiple sites status on one screenGreen tick
    Allows First Fix Response to SiteGreen tick

    4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

  • Downloads

We are here when you need us most

As a client of Critical Power Supplies you can expect 24×7 support whether on the phone, email or on site because we always deliver on our promise to keep you operational and your satisfaction is paramount to everything we do.

Contact us