SKU: SMX3000XLRT2UA Categories: , Tag:

Tripp Lite SmartPro 230V 3kVA 2.7kW Line-Interactive Sine Wave UPS, 2U, Extended Run, Network Card Options, LCD, USB, DB9 - SMX3000XLRT2UA

  • Available to order.
  • ETA will be advised upon ordering or call us on 0800 978 8988 for leadtime.

£1,038.60 Ex. VAT £1,246.32 Inc. VAT

All major debit and credit cards accepted.

  • Description
    • Tripp Lite SMX3000XLRT2UA line interactive 2U rack/tower UPS with 3000VA / 3kVA capacity and extended runtime options
    • Line interactive UPS with Automatic Voltage Regulationcorrects brownouts and overvoltages from 178 to 278V
    • C20 AC power inlet; 8 C17 and 1 C19 output receptacles, Two independently switchable output load banks
    • Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
    • High 98% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
    • Internal batteries offer 17.1at 50% loadand 3.9at 100% load
    • Extended runtime is available with optional external battery packs BP48V24-2U , BP48V60RT-3Uand BP48V27-2US
    • External battery configurations require the use of Tripp Lite’s External Battery Configuration Software
    • Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment
    • Intelligent battery management system extends battery life
    • Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
    • LCD interface also supports a number of advanced user setup and operating preferences
    • Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement
    • Built-in USB, RS-232 and slot for optional network management card options
    • Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD
    • Optional WEBCARDLXwith the latest version of PowerAlert Device Manager firmwareprovides enhanced remote management capabilities
    • PADM20 and PowerAlert Element Managerform a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations
    • IP-based Auto Probe detects lost connectivity and restores service autonomously
    • HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
    • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite’s PowerAlert software, available via FREE download from
    • Built-in Emergency Power Offinterface with cable
  • Technical Data


    UPC Code037332181381
    UPS TypeLine-Interactive
    Rated input current (Maximum Load)14.1A
    Nominal Input Voltage(s) Supported230V AC
    UPS Input Connection TypeC20 inlet
    UPS Input Connection DescriptionIEC320-C20 input connection accepts a variety of user supplied detachable C19 output cordsets to match country or site specific power sources
    Input Circuit Breakers20A
    Input PhaseSingle-Phase
    Output Volt Amp Capacity (VA)3000
    Output Capacity (kVA)3.00
    Output Watt Capacity (Watts)2700
    Output kW Capacity (kW)2.70
    Power Factor  0,9
    Nominal Voltage Details230v nominal inverter output voltage
    Frequency Compatibility50 / 60 Hz
    Frequency Compatibility DetailsAutomatic frequency selection
    Output Voltage Regulation (Line Mode)+6%, -15%
    Output Voltage Regulation (Battery Mode)+/-5%
    Included Output Power CablesSet of 3 C13 to C14 power cables included
    Load Management Receptacles  Two switchable single outlet C13 load banks
    Output AC Waveform (AC Mode)Pure Sine wave
    Output AC Waveform (Battery Mode)Pure Sine wave
    Nominal Output Voltage(s) Supported220V; 230V; 240V
    Output Receptacles(8) C13; (1) C19
    Individually Controllable Load Banks  Yes
    Battery TypeValve Regulated Lead Acid (VRLA)
    Full Load Runtime (min.)  3.9 min. (2700w)
    Half Load Runtime (min.)  11.1 min. (1350w)
    Expandable Battery RuntimeExtended runtime supported via optional external battery packs
    Expandable RuntimeYes
    External Battery Pack Compatibility   BP48V24-2U  (limit 1);  BP48V60RT-3U  (multi-pack compatible);  BP48V27-2US  (multi-pack compatible)
    DC System Voltage (VDC)48
    Battery Recharge Rate (Included Batteries)Less than 5 hours from 10 to 90% (typical, full load discharge)
    Battery AccessFront panel battery access door
    Internal UPS Replacement Battery Cartridge RBC58-2U
    Battery Replacement DescriptionHot-swappable, replaceable batteries
    Voltage Regulation DescriptionAutomatic voltage regulation (AVR) maintains line power operation with an input voltage range of 158 to 278
    Overvoltage Correction  Input voltages between 244 and 278 are reduced by 12%
    Undervoltage Correction  Input voltages between 206 and 183 are boosted by 12%
    Severe Undervoltage CorrectionInput voltages between 158 and 183 are boosted by 24%
    Front Panel LCD DisplayFront panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
    Switches3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
    Alarm Cancel OperationPower-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available
    Audible AlarmAudible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
    UPS AC Suppression Joule Rating350
    EMI / RFI AC Noise Suppression  Yes
    AC Suppression Response Time  Instantaneous
    Primary Form FactorRackmount
    Cooling MethodFan
    Included Mounting Accessory DescriptionIncluded 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)
    Installation Form Factors Supported with Included Accessories4 post 19 inch rackmount
    Installation Form Factors Supported with Optional Accessories2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM )
    Minimum Required Rack Depth with External Battery Pack (cm)67
    Minimum Required Rack Depth with External Battery Pack (in.)26.5
    Minimum Required Rack Depth without External Battery Pack (cm)58
    Minimum Required Rack Depth without External Battery Pack (in.)23
    Optional Mounting Accessory NotesOptional  2-9USTAND  enables upright tower UPS placement;  2POSTRMKITWM  enables wall-mount and 2-post rackmount installation;  4POSTRAILKITWM  enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm);  UPSHDEARKIT  enables installation in 2 or 4-post racks using front vertical rails only, without rear support
    Primary UPS Depth (mm)495
    Primary UPS Height (mm)89
    Primary UPS Width (mm)445
    Rack Height2U
    Shipping Dimensions (hwd / cm)22.86 x 60.32 x 52.07
    Shipping Weight (kg)40.37
    UPS Housing MaterialSteel
    UPS Power Module Dimensions (hwd, cm)8.89 x 44.45 x 49.53
    UPS Power Module Weight (kg)28.49
    Operating Temperature Range+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
    Storage Temperature Range+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
    Relative Humidity0 to 95%, non-condensing
    AC Mode BTU / Hr. (Full Load)  158
    Battery Mode BTU / Hr. (Full Load)  1501
    AC Mode Efficiency Rating (100% Load)98%
    Audible Noise45 dBA maximum, front side 1m
    Network Monitoring Port DescriptionSupports detailed monitoring of UPS and site power conditions
    PowerAlert SoftwareFor local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at
    Communications CableUSB, DB9 and EPO cabling included
    WatchDog CompatibilitySupports Watchdog application, OS and hard-reboot restart options for remote applications
    Network Management Card DescriptionNetwork management card optional
    Communications InterfaceDB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled)
    Transfer Time  6 milliseconds (AC to battery mode), 1 millisecond (Battery to AC mode)
    Low Voltage Transfer to Battery Power (Setpoint)158
    High Voltage Transfer to Battery Power (Setpoint)278
    Cold Start (Startup in Battery Mode During a Power Failure)Cold-start operation supported
    High Availability UPS Features  Auto Probe Monitoring and Reboot (requires WEBCARDLX); Automatic Voltage Regulation (AVR); Expandable battery backup; Hot swappable batteries; Remote management; Sine wave output; Surge/noise protection
    Green Energy-Saving FeaturesGreater than 95% efficiency – GREEN UPS; Individually controllable load banks; Schedulable daily hours of economy mode operation
    UPS CertificationsCE; ROHS (Restriction of Hazardous Substances)
    Certification DetailsIEC 62040-1, IEC 62040-2 Class A EMI, GOST
    Product Warranty Period (Worldwide)2-year limited warranty
  • Onsite Maintenance

    Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.

    1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT

    For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

    Warranty Plus Extends your warranty up to 3 years, next working day replacementGreen tick
    Warranty Plus Extends your warranty up to 5 years, next working day replacementGreen tick
    Intervention, Provides one preventative maintenance visit, planned visitGreen tick
    Battery Plus, Provides replacement batteries to site, next working day replacementGreen tick
    Warranty One Extends your warranty up to 1 year, next working day replacementGreen tick

    2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

    No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

    Services Included

    Silver Level

    Gold Level

    Platinum Level


    Technical Hotline 24/7YesYesYesGreen tick
    Preventative MaintenanceYesYesYesGreen tick
    Remote Monitoring 24/7YesYesYesGreen tick
    Firmware UpgradesYesYesYesGreen tick
    Emergency ResponseYesYesYesGreen tick
    LabourYesYesYesGreen tick
    PartsYesYesYesGreen tick
    Monthly Event/Status ReportoptionoptionoptionGreen tick
    Onsite Crash KitoptionoptionoptionGreen tick
    Response Time12 working hours8 working hours4 clock hoursGreen tick

    3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

    Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

    Engineer Installation and configuration during normal hoursGreen tick
    24×7 flexible status and remote monitoring.Green tick
    Encrypted communication, allowing safe offsite monitoringGreen tick
    Alarms and events emailed and SMS texted automaticallyGreen tick
    Firewall FriendlyGreen tick
    Cloud based status overview and multiple sites status on one screenGreen tick
    Allows First Fix Response to SiteGreen tick

    4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

  • Downloads
  • Reviews (0)
    Product Reviews


    There are no reviews yet.

    Be the first to review “Tripp Lite SmartPro 230V 3kVA 2.7kW Line-Interactive Sine Wave UPS, 2U, Extended Run, Network Card Options, LCD, USB, DB9”

    Your email address will not be published.

    Company Reviews

Customers also bought…

We are here when you need us most

As a client of Critical Power Supplies you can expect 24×7 support whether on the phone, email or on site because we always deliver on our promise to keep you operational and your satisfaction is paramount to everything we do.

Contact us