SKU: FXH45-12 Categories: , , Tag:

Yuasa FXH 12V 46.4Ah Front Terminal VRLA Battery - FXH45-12

  • Available to order.
  • ETA will be advised upon ordering or call us on 0800 978 8988 for leadtime.

£187.66 Ex. VAT £225.19 Inc. VAT

All major debit and credit cards accepted.

  • Description

    The FXH range of batteries for standby power applications, including telecommunications and UPS. The front terminal design allows for rapid installation and easy maintenance. With high performance and long design life, this front terminal range of batteries is an excellent choice for all critical standby applications.

    FEATURES

    • EUROBAT Classification: Over 12 years ‘Very Long Life’
    • Front terminal VRLA battery
    • Compliant with IEC60896-21+22 
    • ABS case material to UL94:V0
    • Absorbed Glass Mat construction with no free acid
    • Gas recombination
    • Good recovery from deep discharge
    • Operation in any orientation (excluding continuous inverted use)
  • Technical Data
    Specifications
    Nominal voltage (V)12
    20-hr rate Capacity to 10.5V at 20C (Ah)46.4
    10-hr rate Capacity to 10.8V at 20C (Ah)44.6
    Dimensions
    Length (mm)278
    Width (mm)103
    Height (mm)197
    Mass (kg)15
    Terminal Type
    Threaded terminal – (M=Male or F=Female)M6 (F)
    Torque (Nm)2-3
    Operating Temperature Range
    Storage (in fully charged condition)-15C to +45C
    Charge-15C to +45C
    Discharge-15C to +45C
    Storage
    Capacity loss per month at 20C (% approx.)3
    Case Material
    StandardABS (UL94:V0)
    Charge Voltage
    Float charge voltage at 20C (V)/Block13.65 (1%)
    Float charge voltage at 20C (V)/Cell2.275 (1%)
    Float Chg voltage tmp correction factor from std 20C (mV)-3
    Cyclic (or Boost) charge Voltage at 20C (V)/Block14.52 (3%)
    Cyclic (or Boost) charge Voltage at 20C (V)/Cell2.42 (3%)
    Cyclic Chg voltage tmp correction factor from std 20C (mV)-4
    Charge Current
    Float charge current limit (A)4.64
    Cyclic (or Boost) charge current limit (A)4.64
    Maximum Discharge Current
    1 second (A)400
    1 minute (A)150
    Impedance
    Measured at 1 kHz (m?)4.7
    Design Life & Approvals
    EUROBAT Classification: Very Long Life12+
    Yuasa design life at 20C (yrs)12
  • Onsite Maintenance

    Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.

    1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT

    For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

    Warranty Plus Extends your warranty up to 3 years, next working day replacementGreen tick
    Warranty Plus Extends your warranty up to 5 years, next working day replacementGreen tick
    Intervention, Provides one preventative maintenance visit, planned visitGreen tick
    Battery Plus, Provides replacement batteries to site, next working day replacementGreen tick
    Warranty One Extends your warranty up to 1 year, next working day replacementGreen tick

    2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

    No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

    Services Included

    Silver Level

    Gold Level

    Platinum Level

     

    Technical Hotline 24/7YesYesYesGreen tick
    Preventative MaintenanceYesYesYesGreen tick
    Remote Monitoring 24/7YesYesYesGreen tick
    Firmware UpgradesYesYesYesGreen tick
    Emergency ResponseYesYesYesGreen tick
    LabourYesYesYesGreen tick
    PartsYesYesYesGreen tick
    Monthly Event/Status ReportoptionoptionoptionGreen tick
    Onsite Crash KitoptionoptionoptionGreen tick
    Response Time12 working hours8 working hours4 clock hoursGreen tick

    3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

    Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

    Engineer Installation and configuration during normal hoursGreen tick
    24×7 flexible status and remote monitoring.Green tick
    Encrypted communication, allowing safe offsite monitoringGreen tick
    Alarms and events emailed and SMS texted automaticallyGreen tick
    Firewall FriendlyGreen tick
    Cloud based status overview and multiple sites status on one screenGreen tick
    Allows First Fix Response to SiteGreen tick

    4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

  • Downloads
  • Reviews (0)
    Product Reviews

    Reviews

    There are no reviews yet.

    Be the first to review “Yuasa FXH 12V 46.4Ah Front Terminal VRLA Battery”

    Your email address will not be published.

    Company Reviews

We are here when you need us most

As a client of Critical Power Supplies you can expect 24×7 support whether on the phone, email or on site because we always deliver on our promise to keep you operational and your satisfaction is paramount to everything we do.

Contact us