SKU: YUCEL 2.9-12 Categories: , , Tag:

Yuasa YUCEL 12V 2.9Ah General Purpose VRLA Battery - YUCEL 2.9-12

Find out how you can order below

How to buy

  • Description

    The Yucel 12V 2.9Ah VRLA battery from Yuasa is built for multiple uses from Power Management, Portable Devices, Consumer Electronics, Industrial.

    Overview

    • 20-Hr rate Capacity to 1.75VPC at 20°C – 2.8Ah
    • Terminal type – FASTON (Quickfit / release)
    • Standard Case Material – ABS (UL.94:HB)
    • Eurobat classification – 3 to 5 years
    • Battery Weight – 1.1Kg
  • Technical Data
    SPECIFICATIONS
    Nominal voltage12V
    20-hr rate Capacity to 1.75VPC at 20C2.9Ah
    10-hr rate Capacity to 1.75VPC at 20C2.7Ah
    DIMENSIONS
    Length79 (1)mm
    Width56 (1)mm
    Height99 (1)mm
    (height over terminals)105 (2)mm
    Mass (typical)1.1kg
    TERMINAL TYPE
    FASTON (Quickfit / release)4.75mm
    OPERATING TEMPERATURE RANGE
    Storage-20C to +60C
    Charge-15C to +50C
    Discharge-20C to +60C
    STORAGE
    Capacity loss per month at 20C (approx)3%
    CASE MATERIAL
    Standard OptionABS (UL.94:HB)
    Flame retardant option (FR)ABS (UL94:V0)
    CHARGE VOLTAGE
    Float charge voltage at 20C13.65 (1%)V
    2.275 (1%)V/cell
    Float Charge voltage temperature correction factor
    (for variations from the standard 20C)    		-3mV/cell/C
    Cyclic (or Boost) charge at 20C14.5 (3%)V
    2.42 (3%)V/cell
    Cyclic Charge voltage temperature correction factor
    (for variations from the standard 20C)    		-4mV/cell/C
    CHARGE CURRENT
    Float charge current limitNo limitA
    Cyclic (or Boost) charge current limit0.73A
    MAXIMUM DISCHARGE CURRENT
    1 minute29A
    SHORT-CIRCUIT CURRENT & INTERNAL RESISTANCE
    (according to EN IEC 60896-21)
    Internal resistanceN/Am?
    Short-Circuit currentN/AA
    IMPEDANCE
    Measured at 1 kHz55m?
    PERFORMANCE & CHARACTERISTICS
    Refer to the technical manualYUCEL
    DESIGN LIFE
    EUROBAT Classification: Standard Commercial3 to 5years
    Yuasa design life @ 20Cup to 5years
    SAFETY
    Installation
    Can be installed and operated in any orientation except permanently inverted
    Handles
    Batteries must not be suspended by their handles (where fitted)
    Vent valves
    Each cell is fitted with a low pressure release valve to allow gasses to escape and then reseal.
    Gas Release
    VRLA Batteries release hydrogen gas which can form explosive mixtures in air. Do not place inside a
    sealed container
    Recycling
    YUASA’s VRLA batteries must be recycled at the end of life in accordance with local and national laws
    and regulations
  • Onsite Maintenance

    Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24×7 on our sales number.

    1: Plug and Play (400-3kVA) – Extended Warranty Contracts from 1 to 5 years from £5.99 per month ex VAT

    For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

    Warranty Plus Extends your warranty up to 3 years, next working day replacementGreen tick
    Warranty Plus Extends your warranty up to 5 years, next working day replacementGreen tick
    Intervention, Provides one preventative maintenance visit, planned visitGreen tick
    Battery Plus, Provides replacement batteries to site, next working day replacementGreen tick
    Warranty One Extends your warranty up to 1 year, next working day replacementGreen tick

    2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

    No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

    Services Included

    Silver Level

    Gold Level

    Platinum Level

     

    Technical Hotline 24/7YesYesYesGreen tick
    Preventative MaintenanceYesYesYesGreen tick
    Remote Monitoring 24/7YesYesYesGreen tick
    Firmware UpgradesYesYesYesGreen tick
    Emergency ResponseYesYesYesGreen tick
    LabourYesYesYesGreen tick
    PartsYesYesYesGreen tick
    Monthly Event/Status ReportoptionoptionoptionGreen tick
    Onsite Crash KitoptionoptionoptionGreen tick
    Response Time12 working hours8 working hours4 clock hoursGreen tick

    3: 24×7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

    Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

    Engineer Installation and configuration during normal hoursGreen tick
    24×7 flexible status and remote monitoring.Green tick
    Encrypted communication, allowing safe offsite monitoringGreen tick
    Alarms and events emailed and SMS texted automaticallyGreen tick
    Firewall FriendlyGreen tick
    Cloud based status overview and multiple sites status on one screenGreen tick
    Allows First Fix Response to SiteGreen tick

    4. IR Thermal Imaging Surveys – Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

    Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

  • Reviews (0)
    Product Reviews

    Reviews

    There are no reviews yet.

    Be the first to review “Yuasa YUCEL 12V 2.9Ah General Purpose VRLA Battery”

    Your email address will not be published.

    Company Reviews
    Trustpilot

We are here when you need us most

As a client of Critical Power Supplies you can expect 24×7 support whether on the phone, email or on site because we always deliver on our promise to keep you operational and your satisfaction is paramount to everything we do.

Contact us

Related products

Our brands

Shown below is a small selection of some of our customers we have helped through understanding clients challenges and implementing our unique approach to helping clients built around: listening to our clients, understanding the challenges they face and providing a range of options which compliments their requirements. Our aim is not to sell products but provide solutions with the help of our in house Power Consultants and Electricians.

ABB
APC
Eaton
Riello UPS
Salicru
Tripp Lite
Vertiv