24 Hour: 0800 978 8988 Int: +44 (0)1844 340122
x

Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount - PDUMH20HVAT

Part Number: PDUMH20HVAT

Product (ex VAT):
£303.23
Product (inc VAT):
£363.87
13 IN STOCK:

Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED’s display primary or secondary power availability.
- 200-240V 16/20A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 16A continuous)
- Provides a redundant power option for critical networking equipment with a single input power cord
- 2 digit display reports output power consumption in amps
- 1U horizontal rackmount form factor; 14.8 in. / 37.6 cm depth
- 10 outlets (8 C13, 2 C19)
- Set of two C20 inlets support connection to separate PRIMARY and SECONDARY power sources
- Two 12ft / 3.6m C19 to C20 power cables included
- ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable
- ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS with zero transfer time similar to Tripp Lite SmartOnline series)
- Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported
- On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
- Super-fast switchover between primary and secondary power sources occurs in 2-5 milliseconds
- Built-in card slot supports optional SNMPWEBCARD for permanent upgrade to a switched & monitored PDU system
- Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup
- Front panel LEDs confirm power availability on both input lines
- TAA Compliant Version Available – Order Tripp Lite PDUMH20HVATAA

Design
PDU typesMetered
MountingHorizontal
MaterialMetal
Product colourBlack
CertificationUL 60950 (USA, Canada), CE (Europe), Class A (Emissions), NOM (Mexico)
RoHS complianceYes
Rack capacity1U
Ports & interfaces
AC outlets quantity10 AC outlet(s)
AC outlet typesC13 coupler,C19 coupler
Power plugC20 coupler
Ergonomics
Cable length3.6 m
LED indicatorsYes
Operational conditions
Storage temperature (T-T)-15 - 50 °C
Operating altitude0 - 3000 m
Power
Nominal input voltage200-240 V
Nominal output voltage200-240 V
Maximum current20 A
AC input frequency50/60 Hz
Weight & dimensions
Dimensions (WxDxH)439 x 376 x 44 mm
Weight4.7 kg

Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24x7 on our sales number.

1: Plug and Play (400-3kVA) - Extended Warranty Contracts from 1 to 5 years from £9.99 per month ex VAT

For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

Warranty Plus Extends your warranty up to 3 years, next working day replacement
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 1
Warranty Plus Extends your warranty up to 5 years, next working day replacement
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 2
Intervention, Provides one preventative maintenance visit, planned visit  
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 3
Battery Plus, Provides replacement batteries to site, next working day replacement
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 4
Warranty One Extends your warranty up to 1 year, next working day replacement  
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 5


2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

Services Included

Silver Level

Gold Level

Platinum Level

 

Technical Hotline 24/7
Yes
Yes
Yes
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 6
Preventative Maintenance
Yes
Yes
Yes
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 7
Remote Monitoring 24/7
Yes
Yes
Yes
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 8
Firmware Upgrades
Yes
Yes
Yes
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 9
Emergency Response
Yes
Yes
Yes
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 10
Labour
Yes
Yes
Yes
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 11
Parts
Yes
Yes
Yes
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 12
Monthly Event/Status Report
option
option
option
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 13
Onsite Crash Kit
option
option
option
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 14
Response Time
12 working hours
8 working hours
4 clock hours
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 15

 

3: 24x7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

Engineer Installation and configuration during normal hours
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 16
24x7 flexible status and remote monitoring.      
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 17
Encrypted communication, allowing safe offsite monitoring    
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 18
Alarms and events emailed and SMS texted automatically    
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 19
Firewall Friendly
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 20
Cloud based status overview and multiple sites status on one screen
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 21
Allows First Fix Response to Site
Critical Power Supplies - Tripp lite 3.2-3.8kw single-phase ats/metered pdu, 200-240v (8 c13 & 2 c19), 2 c20, 3.66 m cord, 1u rack-mount image 22


>

4. IR Thermal Imaging Surveys - Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

.

Let us know what you think of this product

If you have purchased this from us in the past then please take some time to review the product, along with the quality of service you received from us!

How can we help?