24 Hour: 0800 978 8988 Int: +44 (0)1844 340122
x

Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime)

Product (ex VAT):
£592.01
Product (inc VAT):
£710.41
13 IN STOCK:

The Tripp Lite’s SMX1200XLHG offers medical-grade UPS from Critical Power Supplies.

Protection with built-in line-interactive voltage regulation, expandable battery runtime and intelligent monitoring with unattended shutdown capability. Tested to CE/IEC 60601-1 standard as medical electrical equipment. Built-in isolation transformer with Faraday shield offers full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Includes high quality hospital-grade plug and outlets. Resistant to electrostatic discharge. 1000VA power handling capacity supports computers, inter-networking equipment and other critical loads during commercial power failures. External battery connector allows configuration for up to several hours of runtime during power failures by adding one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible). Line interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V back to normal 230V levels, saving battery reserves for use only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1 USB, 1 DB9) that work with included PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.

Features and Benefits

- Ideal UPS protection for applications in medical patient-care areas where CE/IEC 60601-1 listed medical electrical equipment is required
- Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
- Provides connected equipment with continuous power during short and long duration loss of commercial power
- Expandable runtime is available with the addition of one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible)
- Line-interactive voltage regulation corrects brownouts and overvoltages from 155 to 274 volts back to usable 230V output levels, without using battery power
- Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
- Resistant to electrostatic discharge
- Supports loads up to 1000VA/750W
- 27.5 min. half-load runtime (500VA/375W), 11 min. full load runtime (1000VA/750W)
- 6 protected outlets; 6-inch dongle with IEC C14 inlet
- USB and DB9 communication ports
- PowerAlert unattended shutdown software and complete cabling included
- Complete surge protection, line isolation and EMI/RFI noise filtering
- 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
- Battery replacement door and back panel grounding lug
- 2-year product warranty

Typical Applications

CE/IEC 60601-1 compliant UPS provides ultimate safety and reliability for patient point of care solutions, telemedicine, nurse’s stations, wireless communications systems, electronic prescribing applications, medical imaging and mission critical equipment. Not recommended for life support applications

Package Includes

- SMX1200XLHG Medical Grade Tower UPS System
- PowerAlert Software and cabling
- Warranty information
- Instruction manual

Power
Output power750 W
Input operation voltage (min)230 V
Input operation voltage (max)230 V
Output operation voltage (min)230 V
Output operation voltage (max)230 V
Power supply input frequency50/60
Surge energy rating340 J
Maximum current10 A
Output power capacity1000 VA
Ports & interfaces
AC outlets quantity6 AC outlet(s)
AC outlet typesC13 coupler
Power plugC14 coupler
Battery
Battery recharge time4.5 h
Typical backup time at half load27.5 min
Typical backup time at full load11 min
Hot-swap batteryYes
Cold startYes
Design
Form factorTower
Colour of productWhite
Performance
LED indicatorsYes
EMI/RFI noise filteringYes
Surge protectionYes
Power protection featuresOver voltage, Under voltage
Audible alarm(s)Yes
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-15 - 50 °C
Operating relative humidity (H-H)0 - 95%
Certificates
CertificationCE, IEC 60601-1
Weight & dimensions
Weight20.7 kg
Width190 mm
Height323 mm
Depth231 mm
Other features
InterfaceUSB; DB9
Power
Output power750 W
Input operation voltage (min)230 V
Input operation voltage (max)230 V
Output operation voltage (min)230 V
Output operation voltage (max)230 V
Power supply input frequency50/60 Hz
Surge energy rating340 J
Maximum current10 A
Output power capacity1000 VA
Ports & interfaces
AC outlets quantity6 AC outlet(s)
AC outlet typesC13 coupler
Power plugC14 coupler
Battery
Battery recharge time4.5 h
Typical backup time at half load27.5 min
Typical backup time at full load11 min
Hot-swap batteryYes
Cold startYes
Design
Form factorTower
Product colourWhite
Performance
LED indicatorsYes
EMI/RFI noise filteringYes
Surge protectionYes
Power protection featuresOver voltage, Under voltage
Audible alarm(s)Yes
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-15 - 50 °C
Operating relative humidity (H-H)0 - 95%
Certificates
CertificationCE, IEC 60601-1
Weight & dimensions
Weight20.7 kg
Width190 mm
Height323 mm
Depth231 mm
Other features
InterfaceUSB; DB9
Part Number SMX1200XLHG
Downloads
Product Datasheet SMX1200XLHG.pdf
Runtime Chart SMX1200XLHG_Runtime_Chart.pdf
Operation Manual OMNIX_Medical_Grade_UPS.pdf
PDF Download mmo_9177690_1504356196_4297_26353.pdf

Onsite Maintenance is as easy as 1, 2, 3, 4. Contact us for further information 24x7 on our sales number.

1: Plug and Play (400-3kVA) - Extended Warranty Contracts from 1 to 5 years from £9.99 per month ex VAT

For plug & play UPS Critical Power offers you a full range of distributed service packs. These competitively priced turn-key solutions optimize your UPS performances and enhance the availability of your equipment while meeting your financial constraints and technical requirements.

Warranty Plus Extends your warranty up to 3 years, next working day replacement
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 1
Warranty Plus Extends your warranty up to 5 years, next working day replacement
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 2
Intervention, Provides one preventative maintenance visit, planned visit  
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 3
Battery Plus, Provides replacement batteries to site, next working day replacement
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 4
Warranty One Extends your warranty up to 1 year, next working day replacement  
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 5


2: Hardwired (4kVA Upwards– Onsite Maintenance Contracts from 1 to 5 years from £49.99 per month ex VAT

No matter what, your UPS, Generator, Cooling, Switchgear or Electrical Hardware must be ready to perform at all times. While every power solution we supply is backed-up by a comprehensive warranty with the manufacturer, maintenance plans to ensure business continuity are highly recommended, particularly for UPS systems from 1kVA. In particular, the battery set is of prime importance, and must be in good working order. With other consumables, such as fans and DC capacitors requiring regular maintenance and inspection logs reviewed to predict potential future problems.

Services Included

Silver Level

Gold Level

Platinum Level

 

Technical Hotline 24/7
Yes
Yes
Yes
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 6
Preventative Maintenance
Yes
Yes
Yes
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 7
Remote Monitoring 24/7
Yes
Yes
Yes
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 8
Firmware Upgrades
Yes
Yes
Yes
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 9
Emergency Response
Yes
Yes
Yes
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 10
Labour
Yes
Yes
Yes
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 11
Parts
Yes
Yes
Yes
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 12
Monthly Event/Status Report
option
option
option
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 13
Onsite Crash Kit
option
option
option
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 14
Response Time
12 working hours
8 working hours
4 clock hours
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 15

 

3: 24x7 Remote Monitoring Contracts from 1 month to 5 years from £29.99 per month ex VAT

Remote monitoring of UPS, Generators, Air Conditioning, Site Access and Environmental Systems is essential to allow swift offsite investigation of fault reports and real-time monitoring of the site status, allowing the correct response to be created and dispatched to site.

Engineer Installation and configuration during normal hours
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 16
24x7 flexible status and remote monitoring.      
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 17
Encrypted communication, allowing safe offsite monitoring    
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 18
Alarms and events emailed and SMS texted automatically    
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 19
Firewall Friendly
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 20
Cloud based status overview and multiple sites status on one screen
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 21
Allows First Fix Response to Site
Critical Power Supplies - Tripp Lite SmartPro 1kVA Medical UPS (11 Minutes Runtime) image 22


>

4. IR Thermal Imaging Surveys - Infrared electrical inspection. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly. Infrared electrical inspections find hot spots caused by defects in connections and components.

Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

.

Let us know what you think of this product

If you have purchased this from us in the past then please take some time to review the product, along with the quality of service you received from us!

How can we help?